Installation Method of Led Floodlight


Installation method of led floodlight
Materials required for the installation method of large floodlights:
LED guardrail light clip, transformer with waterproof function, sub-controller.
Proceed as follows:
1. Install guardrails, punch holes on the wall, and the spacing is generally within 3 cm according to actual requirements;
2. Do a good job of anti-static measures, such as grounding the workbench, workers wearing corresponding electrostatic clothing, and anti-static measures, because the quality of LED floodlights of different grades is different, and the anti-static ability is different;
3. Pay attention to the tightness of the installation, the tightness is not good, and the diameter affects the service life of the LED floodlight;
4. The LED floodlight wiring should preferably not exceed 25 cm, and the transformer with high power can be lengthened accordingly, otherwise the brightness will be affected.
How to install floodlights
1. Try to use the LED form in series, because the voltage difference of LED floodlights is special. The peak current of ordinary LEDs is maintained at 80 mA, and the reverse voltage is around 6V. When designing LEDs, it is necessary to pay attention to the peak voltage and current when designing the circuit.
2. Use a voltage below 25 watts when soldering, and the temperature of the soldering iron should be controlled below 300 degrees Celsius. When the SMD LED is exposed at high temperature, do not squeeze its epoxy resin part, or wipe it with a sharp and hard object, because the LED lamp is very fragile. Yes, it is very easy to damage, and the welding time is less than 3 seconds.
3. LED floodlights are widely used, so installation skills and precautions are very important. LED is a new light source. Under the correct installation method, it can ensure the stable and long-term normal operation of LED floodlights.
LED Flood Light